Products – Sink Legs – Classic Collection – Ball Foot



The Ball Foot style is a vanity console featuring Palmer’s unique ball-and-socket corner joint, with its sharp lines and visual heft, paired with perfectly matching ball feet.
- Available in 1.5” & 1” diameter tubing
Counter, faucet, and sink by others.
Configurations
Available Leg configurations include:
- Single Leg
- Two Leg
- Three Leg
- Four Leg
- Five Leg
- Custom Leg
Finishes
Shelving and Shelf Supports

Glass Shelf
Glass Shelf
Our glass shelves provide much-needed practical storage for your space, while maintaining the open feel of our leg consoles. Each shelf is custom made to your specific dimensions, and rests nicely upon our sturdy shelf supports.
Our glass is a full ½”-thick, tempered to U.S. safety standards, and machined perfectly to a smooth and defect-free polish on all edges.

Teak Wood Shelf
Teak Wood Shelf
Introduce a spa-like atmosphere to your bathroom with the Palmer solid Teak wood shelf.
Each shelf is custom made to your specific dimensions, and complements the metalwork of the console with a warm texture, and coordinating material.
Required Shelf Support Options

Clip
Clip Shelf Support
The Clip Shelf Support provides an extremely minimal option for supporting a glass or stone shelf. This unique system shows no visible components on the front of the legs, thereby providing an uninterrupted view of the entire leg as viewed from the front of the washstand.
for use with:
- Glass Shelf
- Stone Shelf
- Cannot be used with Acrylic Leg option

Low Profile
Low Profile Shelf Support
The Low Profile Shelf Support is similar to our Rail Style design, utilizing a tubular member extending from the rear of the leg to the wall to carry a shelf; however, in a much more streamlined fashion.
for use with:
- Hotel Shelf
- Glass Shelf
- Teak Shelf
- Stone Shelf
- Cannot be used with Acrylic Leg option

Rail Style
Rail Style Shelf Support
This shelf support continues to be our most requested option, and provides a sturdy and stylish support for your choice of virtually any shelf, such as glass, stone, wood, or our Palmer tubular metal hotel-style shelf.
The “Tee” fitting will match the style of your leg system:
Ball style for the “Classic” collection
Studio style for the “Modern” collection
For use with:
- Tubular Metal Shelf
- Glass Shelf
- Teak Shelf
- Stone Shelf

Split Collar
Split Collar Shelf Support
The Split Collar Shelf Supports allow the console legs to pass uninterrupted (not cut) directly through a hole in the stone shelf. The collars and provided rubber gaskets capture the shelf, and allow positioning at any height above the floor.
For use with:
- Stone Shelves
Options

Front Riser
Front Riser
In addition to being a desirable design element for wider consoles,
the Front Riser option provides additional counter support.
- Available in 1.5” diameter only
- Not available for acrylic crossbars
- Front riser(s) should be considered for counters 48” or wider
- Consult your counter supplier regarding support requirements
- Front riser will not prevent all flexing of counter if excessive force is applied

Split Diameter
Split Diameter
1.5” Diameter Legs with 1.0” Diameter Crossbar
- Combination of two tubing diameters
- Provides dimensional contrast and design interest

ADA Compliant
ADA Compliant Sizing
Palmer offers custom sizing for our sink leg systems to meet ADA clearance and accessibility requirements. We can adjust leg height, crossbar placement, and overall dimensions to ensure full compliance—while maintaining the refined detailing and quality craftsmanship that define our products.

Acrylic Tubing
Acrylic Tubing
Palmer’s Acrylic Rod is crystal clear, never ages, and imparts a fine “jewelry quality” to your console. This solid, cast Acrylic Rod, available in 1.5” diameter only, is domestically produced for Palmer to our unique specifications, and is available in Perma-Clear, Seafoam, and High-Gloss Black.

Curved Crossbar
Curved Crossbar
Curved Crossbar Conforms to the Radius of the Counter
- Provides design flair
- Washstand cannot be field cut for width

Reeded Tubing
Reeded Tubing
Substitute Reeded Tubing for Legs and/or Horizontal Tubing
- Unique ribbed detail
- Classic furniture design element
- Not Available for 3/4, tapered, or square tubing

Hammered Ball
Hammered Ball
Ball fitting is Hand Tooled with Hammered Facets
- Hammered ball provides stylish texture and pleasing light reflections
- Each ball is hand-tooled by a skilled artisan
- Available for 1.5″ and 1.0″ diameter tubing
- Selecting Hammered Ball Fittings adds 2 weeks to the standard lead time

Wall Brackets
Wall Brackets
Supports Counter at Wall - Required for all Installations
- Standard aluminum wall bracket(s) included at no charge with all washstands
- Solid brass option plated to match your selected finish
- Heavy weight aluminum wall bracket recommended for counters 150 Lb or more (a typical 36″ W x 24″ D x 1.25″-thick stone top weighs 80 lb)
- Mounts to underside of counter at wall, not visible from a standing position
Hospitality & Commercial – Hospitality Overview
We invite you to browse some of our most recent projects
Browse through our collection of designer images from featured hospitality projects.
Hospitality & Commercial – Hospitality Overview
We invite you to browse some of our most recent projects
Browse through our collection of designer images from featured hospitality projects.
































